SCHIENENFIX

Clamping system for optical and multi-sensorial measuring

  • Modular clamping elements for optical or optical/tactile measuring
  • For high-precision edge measurement in reflected and transmitted light
  • Toothed rails as workpiece rests or for fastening clamping modules
  • For optical/tactile measuring machines, measuring projectors and measuring microscopes

 

The outstanding advantages begin with the simplest toothed rail angle rests:

“Fast Reassembly Lifelong” also and particularly applies to SCHIENENFIX, which not only fully integrates the SWA39 parts via standard interfaces, but also offers interfaces for the SWA5 and SWA8 quick-change adapter systems. dk only supplies rigid angles milled from solid material or Plexiglas plates with tapped holes if very special parts require them or if special processes are improved by them. Interchangeable pallet systems to set-up outside the machine for measuring other identical or completely different test parts are available in many variants with all conceivable workpiece carriers. dk FIXIERSYSTEME developed and standardised these efficient interchangeable systems as part of the SPANNFIX  range from the conception of optical measurement technology.

 

SCHIENENFIX – basic elements

 

Rails, pallets and accessories

An interface between the machine table and the fixturing system. Toothed base rails and connecting rails for an optimum transmitted light measurements.

Download further information

Base mount for quick-action clamp

An interface between the machine table and the fixturing system. SWA 39 quick-action clamp for the direct mounting of fixturing modules from the SWA 39 product range on measuring equipment tables.

Weitere Informationen herunterladen

 

If you have any questions about our products, we look forward to hearing from you and personally advising you. Call us on +49 (0) 7121 90 97 10 – our lines are open Monday to Thursday from 08.00 to 16.00 or Friday from 08.00 to 13.00.

Contact us

 

SCHIENENFIX – structural elements

 

Articulated arms

Progressively clamping articulated arm stand for simplest positioning with maximum stability. Mechanical clamping principle for durably high clamping forces.

Download further information

Rotary unit with fine adjustment and indexing

Free rotating spindle, indexing every 30° and can be clamped at any rotary angle. With SWA 5 connection for many clamping elements such as mini chucks and small-parts clamps. Position of increments and horizontal spindle position can be finely adjusted.

Download further information

Quick-change pallet system

Pallets with T-slot and M6 threads for mounting diverse clamping modules. For reproducible positioning the pallets can be set against a square and held there using spring fingers or toggle clamps.

Weitere Informationen herunterladen

 

If you have any questions about our products, we look forward to hearing from you and personally advising you. Call us on +49 (0) 7121 90 97 10 – our lines are open Monday to Thursday from 08.00 to 16.00 or Friday from 08.00 to 13.00.

Contact us

 

SCHIENENFIX – clamping elements

 

Spring fingers

Clamping elements for quickly and easily holding test parts. Diverse versions available, flat, rounded or forked and adjustable versions. Also available, columns with thread and retaining plates for the columns.

Download further information

Screw jack sets

Adjustable base rail with height-adjustable support. Also available with spring finger for holding the workpiece.

Download further information

Toggle clamps and C-clamps

Clamping elements in a variety of designs such as horizontal clamps, C-clamps, thrust clamps, tension clamps and clamp grips.

Download further information

Precision vices

Precision vices from 15 – 35 mm. Vices with replaceable guide columns for extending the clamping width. Many different exchangeable jaws and holes for pin clamps. Extensive range of accessories.

Download further information

V-blocks

V-block support set for holding shafts horizontally. The ends of the test pieces can be seen through the openings in the plate. The V-block supports can be mounted on the rail system at any distance from each other.

Download further information

Tailstocks

Pair of tailstocks, one with a fixed centre and one with a movable centre, for mounting in T-slots. The movable centre is spring-loaded and can be locked.

Download further information

Dividing heads

Dividing head with spindle ratio reduction 1:40. Precise indexing with a graduated dial and vernier scale. With ER16 collet chuck for 0.5–10 mm collets. Chucks from the range of accessories can also be mounted.

Download further information

Precision chucks

Three-jaw chuck with stepped clamping jaws for holding internally and externally Diverse versions with or without quick-change adapter, alternatively with Morse taper shaft.

Download further information

Small-parts clamps

Clamping elements for small and micro parts with various clamping contours. Diverse versions with SWA 5 quick-change adapter. Specially developed spring geometry and screw arrangement for secure parallel clamping of the workpiece.

Download further information

Magnetic holders and C-clamps

Magnetic holders for clamping flat parts quickly and easily. C-clamps with and without locating pin and various jaw designs.

Download further information

Needle supports

NADELFIX with individually spring-loaded pins, ideal for secure clamping of free-form parts. The needles adapt to any geometry, no matter how complex, and can be fixed in this position.

Download further information

 

If you have any questions about our products, we look forward to hearing from you and personally advising you. Call us on +49 (0) 7121 90 97 10 – our lines are open Monday to Thursday from 08.00 to 16.00 or Friday from 08.00 to 13.00.

Contact us

 

SCHIENENFIX – Other clamping systems

 

Multispannfix

Universal clamping device for quick and easy fixturing by optical transmitted light measuring.

Download further information

Needle supports

NADELFIX with individually spring-loaded pins, ideal for secure clamping of free-form parts. The needles adapt to any geometry, no matter how complex, and can be fixed in this position.

Download further information

Inspection vice

Due to a perpendicularity and parallelism precision of 0.005 mm, all 4 sides can be used. Horizontally and vertically ground prism jaws. Vice and fixed jaw machined from a single piece.

Download further information

Four-way hexagon key

Practical and compact cross design with 3 key sizes per tool. Covers all hexagon socket sizes used in the SPANNFIX and SCHIENENFIX ranges.

Download further information

 

If you have any questions about our products, we look forward to hearing from you and personally advising you. Call us on +49 (0) 7121 90 97 10 – our lines are open Monday to Thursday from 08.00 to 16.00 or Friday from 08.00 to 13.00.

Contact us

 

SCHIENENFIX – sets

 

Sets

Set combinations for different applications, diverse versions as a basic set, expansion set and universal set. Sets with useful pre-configurations for an easier and cost-effective introduction to the world of professional optical measuring and fixturing technology.

Download further information

Sets

The clamping elements can be placed directly onto the measuring table or, if the SWA 39 quick-change adapter is fitted, positioned using the swivel unit.

Download further information

 

If you have any questions about our products, we look forward to hearing from you and personally advising you. Call us on +49 (0) 7121 90 97 10 – our lines are open Monday to Thursday from 08.00 to 16.00 or Friday from 08.00 to 13.00.

Contact us

Do you require further information on SCHIENENFIX?

 

Reception

+49 (0) 7121 90 97 10
info@dk-fixiersysteme.de

Would you like a callback? We are more than happy personally advise you about our products. Please leave your name, telephone number and a short message describing your enquiry.





dk offers even more measuring technology solutions!

You can find all our other products as well as product information in our catalogue.

Download full catalogue

 

dk FIXIERSYSTEME is a specialist provider of modular clamping systems for measuring technology. The focus is on the professional fixturing of workpieces to inspection tables. Learn more.

dk FIXIERSYSTEME is a specialist provider of modular clamping systems for measuring technology. The focus is on the professional fixturing of workpieces to inspection tables. Learn more.

XingFacebookNewsletterCAD DataContactXingFacebook