SPANNFIX ECO 

Economic clamping system for tactile measuring

  • The basics are the baseplates or quick-change mounts
  • Economical solution with grid hole system
  • Wide range of structural and clamping elements
  • Flexible clamping solutions diverse workpiece geometries
  • Quick and easy assembly
  • For tactile measuring machines

 

Reproducible fixtures through grid holes and base rails

The SPANNFIX ECO is the simpler, more economical alternative to the PRO version with fewer and simplified modules on a baseplate with tapped holes in a standard 50 mm grid. The base rails enable any X/Y position can be easily achieved. Because there are no lateral or angular scales as by the PRO version, repeat constructions of exactly the same fixture are more difficult, but are still possible.
The wider range of additional elements included in the PRO system can also be used directly, or with adapters together with the SPANNFIX ECO elements shown here. Overall, a much better and quicker solution for the safe and repeatable fixation of test pieces than specially designed and manufactured single-use fixtures. Here, too, we have such an extensive range of basic, structural, support and clamping elements that, together with the
other dk programs, they make up such a complete world of fixation elements that the user only requires additional, customer-specific fabrications for absolutely special parts or very specific processes. Of course, we can also develop and implement these together with you.

 

SPANNFIX ECO – basic elements

CAD Data

 

Base plates

An interface between the machine table and the fixturing system. For mounting the structural elements in 6 mm T-slots or M6 threads. Square, rectangular, round or customer-specific versions available.

Download further information

 

If you have any questions about our products, we look forward to hearing from you and personally advising you. Call us on +49 (0) 7121 90 97 10 – our lines are open Monday to Thursday from 08.00 to 16.00 or Friday from 08.00 to 13.00.

Contact us

 

SPANNFIX ECO – structural elements

CAD Data

 

Base rails

Adjustable base rail with slot and connection thread for screwing in columns and articulated arms.

Download further information

Hexagonal extensions

Hexagonal extension pieces with male thread one end and female thread other end. For screwing onto satellite mounts and base rails. Screw together to increase height.

Download further information

Self-aligning pads

Support with flattened, swivel ball to compensate for surface irregularities. Can be screwed onto hexagonal extension pieces or directly into base rails.

Download further information

Screw jack set

Adjustable base rail with support and spring finger. The support height is adjustable

Download further information

Adjustable stop

Stop for mounting on Ø12 mm columns. Effective length of the stop ca. 130 mm (to centre of column).

Download further information

Columns with screw

Columns with screws for mounting spring fingers or for use as a stop element.

Download further information

Articulated arms

Progressively clamping articulated arm stand for simplest positioning with maximum stability. Mechanical clamping principle for durably high clamping forces.

Download further information

 

If you have any questions about our products, we look forward to hearing from you and personally advising you. Call us on +49 (0) 7121 90 97 10 – our lines are open Monday to Thursday from 08.00 to 16.00 or Friday from 08.00 to 13.00.

Contact us

 

SPANNFIX ECO – clamping elements

CAD Data

 

Spring fingers

Clamping elements for quickly and easily holding test parts. Diverse versions available, flat, rounded or forked and adjustable versions. Also available, columns with thread and retaining plates for the columns.

Download further information

 Toggle clamps and C-clamps

Clamping elements in a variety of designs such as horizontal clamps, C-clamps, thrust clamps, tension clamps and clamp grips.

Weitere Informationen herunterladen

 

If you have any questions about our products, we look forward to hearing from you and personally advising you. Call us on +49 (0) 7121 90 97 10 – our lines are open Monday to Thursday from 08.00 to 16.00 or Friday from 08.00 to 13.00.

Contact us

 

SPANNFIX ECO – sets

 

Sets

Set combinations for various applications available in a variety of designs, as a basic set, expansion set and complete set. Sets with useful pre-configurations for an easy and cost-effective introduction to the world of professional measuring and fixturing technology.

Download further information

 

If you have any questions about our products, we look forward to hearing from you and personally advising you. Call us on +49 (0) 7121 90 97 10 – our lines are open Monday to Thursday from 08.00 to 16.00 or Friday from 08.00 to 13.00.

Contact us

Do you require further information on SPANNFIX ECO?

 

Reception

+49 (0) 7121 90 97 10
info@dk-fixiersysteme.de

Would you like a callback? We are more than happy personally advise you about our products. Please leave your name, telephone number and a short message describing your enquiry.





dk offers even more measuring technology solutions!

You can find all our other products as well as product information in our catalogue.

Download full catalogue

 

dk FIXIERSYSTEME is a specialist provider of modular clamping systems for measuring technology. The focus is on the professional fixturing of workpieces to inspection tables. Learn more.

dk FIXIERSYSTEME is a specialist provider of modular clamping systems for measuring technology. The focus is on the professional fixturing of workpieces to inspection tables. Learn more.

CAD DatenKontaktXingFacebookNewsletterCAD DataContactXingFacebook