SPANNFIX PRO 

Professional clamping system for tactile measuring

  • The basics are the baseplates or quick-change mounts
  • Exact reproducibility through a slot system with graduations
  • Wide range of structural and clamping elements
  • Flexible clamping solutions diverse workpiece geometries
  • Quick and easy assembly
  • For tactile measuring machines

 

Precisely reproducible fixtures with scales and angular alignment

SPANNFIX PRO modular system fixtures for exact positioning, fixating and clamping of complex geometries while maintaining maximum workpiece accessibility. Comprising basic, structural and clamping elements which can all be connected to each other over standardised interfaces. In the interests of overall cost-effectiveness and sustainability, the configurations can thus be repeatedly dismantled and rebuilt identically or completely anew. Especially during product development, where changes are usually made, the structure can be easily adapted to changed dimensions or forms. Instead of shelf-filling special clamping elements of classical fixture construction which cannot be adapted, and are therefore scrap after the product life cycle of the test part, professionals use modular systems with intelligent components. Since these only make sense when enough different basic, structural and clamping elements form a functional program, SPANNFIX PRO offers not only a wealth of individual parts, but also their troubleree combination with other dk fixation systems.

 

SPANNFIX PRO – basic elements

CAD Data

 

Base plates

An interface between the machine table and the fixturing system. For mounting the structural elements in 6 mm T-slots or M6 threads. Square, rectangular, round or customer-specific versions available.

Download further information

Mounting frames

Slot rails with T-slot 6, can be joined to form angle constructions or complete frames. With scales  for exact and reproducible positioning of fixture elements.

Download further information

 

If you have any questions about our products, we look forward to hearing from you and personally advising you. Call us on +49 (0) 7121 90 97 10 – our lines are open Monday to Thursday from 08.00 to 16.00 or Friday from 08.00 to 13.00.

Contact us

 

SPANNFIX PRO – structural elements

CAD Data

 

T-slot nuts

Used to connect basic rails, columns, SWA 39 quick-action clamps etc. and customer specific structural elements with M6 male threads.

Download further information

Base rails

Adjustable base rail with slot and connection thread for screwing in columns and articulated arms.

Download further information

Hexagonal extensions

Hexagonal extension pieces with male thread one end and female thread other end. For screwing onto satellite mounts and base rails. Screw together to increase height.

Download further information

Self-aligning pads

Support with flattened, swivel ball to compensate for surface irregularities. Can be screwed onto hexagonal extension pieces or directly into base rails.

Download further information

Screw jack set

Adjustable base rail with support and spring finger. The support height is adjustable

Download further information

Columns

Column for precise alignment relative to the slots of the baseplate.

Download further information

Support arms

Support arm for mounting on columns and for mounting V-block halves and adjustable supports.

Download further information

Bridge supports

Bridge support with 10 mm bridge width for mounting on two Ø12 mm support columns. V-block halves and supports with slots can be mounted on the bridge.

Download further information

Pair of V-block halves

Pair of 120° V-block halves with 10 mm slot, mounting on support arms and bridge supports.

Download further information

Adjustable stop

Stop for mounting on Ø12 mm columns. Effective length of the stop ca. 130 mm (to centre of column).

Download further information

Side clamp

Support with fixed stop and draw-down clamping jaw. For mounting on extensions or with T-slot nuts.

Download further information

Thread reducer

Thread reducer for connecting different thread sizes e.g. columns, extension pieces, articulated arms, supports, satellite mounts etc.

Download further information

Columns with screw

Columns with screws for mounting spring fingers or for use as a stop element.

Download further information

Articulated arms

Progressively clamping articulated arm stand for simplest positioning with maximum stability. Mechanical clamping principle for durably high clamping forces.

Download further information

 

If you have any questions about our products, we look forward to hearing from you and personally advising you. Call us on +49 (0) 7121 90 97 10 – our lines are open Monday to Thursday from 08.00 to 16.00 or Friday from 08.00 to 13.00.

Contact us

 

SPANNFIX PRO – clamping elements

CAD Data

 

Spring fingers

Clamping elements for quickly and easily holding test parts. Diverse versions available, flat, rounded or forked and adjustable versions. Also available, columns with thread and retaining plates for the columns.

Download further information

 Toggle clamps and C-clamps

Clamping elements in a variety of designs such as horizontal clamps, C-clamps, thrust clamps, tension clamps and clamp grips.

Weitere Informationen herunterladen

Tailstock and clamping supports

Pair of tailstocks featuring one with fixed and one with adjustable centre. The adjustable centre is spring-loaded and lockable. Diverse centres available in the range.

Weitere Informationen herunterladen

Vacuum system

Flexible round and square vacuum clamping plates for quickly and securely fastening workpieces with maximum accessibility for measuring. Airbase pneumatic sliding foot with three switchable functions for lightly moving heavy workpieces, locking onto smooth bases and positioning the workpiece onto pneumatically connected vacuum clamping plates.

Download further information

 

If you have any questions about our products, we look forward to hearing from you and personally advising you. Call us on +49 (0) 7121 90 97 10 – our lines are open Monday to Thursday from 08.00 to 16.00 or Friday from 08.00 to 13.00.

Contact us

 

SPANNFIX PRO – sets

 

Sets

Set combinations for various applications available in a variety of designs, as a basic set, expansion set and complete set. Sets with useful pre-configurations for an easy and cost-effective introduction to the world of professional measuring and fixturing technology.

Download further information

 

If you have any questions about our products, we look forward to hearing from you and personally advising you. Call us on +49 (0) 7121 90 97 10 – our lines are open Monday to Thursday from 08.00 to 16.00 or Friday from 08.00 to 13.00.

Contact us

Do you require further information on SPANNFIX PRO?

 

Reception

+49 (0) 7121 90 97 10
info@dk-fixiersysteme.de

Would you like a callback? We are more than happy personally advise you about our products. Please leave your name, telephone number and a short message describing your enquiry.





dk offers even more measuring technology solutions!

You can find all our other products as well as product information in our catalogue.

Download full catalogue

 

dk FIXIERSYSTEME is a specialist provider of modular clamping systems for measuring technology. The focus is on the professional fixturing of workpieces to inspection tables. Learn more.

dk FIXIERSYSTEME is a specialist provider of modular clamping systems for measuring technology. The focus is on the professional fixturing of workpieces to inspection tables. Learn more.

CAD DatenKontaktXingFacebookNewsletterCAD DataContactXingFacebook