-->

Styli

Standard product range of 3D styli in stock / Styli for CMM measuring technology

The styli from dk FIXIERSYSTEME are precise sensors with which accurate workpiece measurements down to the µ-range are possible. The functional principle of the probes consists of styli contacting the workpiece surfaces. Tactile probes, i.e. measuring styli that use a tactile sense to touch the surface of workpieces point by point, are mainly used to measure height, thickness or curvature. An analogue probe measures a product in a scanning process. Data acquisition is done by moving the stylus bead over the surface of the object in a tactile manner using a coordinate measuring machine. Compared to digital probes, this has the advantage that more measuring points can be recorded in the shortest time and a higher resolution is achieved.

Buy styli online

We offer a wide and intelligent system of coordinated measuring elements to provide a suitable probe solution for each of your workpieces. In addition to various styli, our probe system also has stylus shafts, joints and adapters as well as holders for star styli.

 

Ball styli:

Our ball styli are probe tips which are glued or soldered on and available in various materials. As standard, ruby balls with a low specific density are used. Zirconia/Ceramic, on the other hand, is used for intensive scanning of cast iron surfaces and is ideal for abrasive surfaces. Silicon nitride balls do not attract aluminium, which results in less material build-up on the stylus ball. This material is therefore mainly used for measuring aluminium workpieces. Our innovative diamond-coated stylus balls are low wearing, guaranteeing a long service life. With these nano-crystalline DC balls, extremely hard, very rough, abrasive and sharp surfaces can be tactilely measured.

 

Styli Shafts:

The stylus shaft can be a solid pin or a tube, depending on the measuring task. We offer carbide, carbon fibre or ceramic as the basic material. For standard applications with high rigidity and in measuring rooms with stable ambient temperatures, we recommend the carbide version. Carbon fibre styli shafts have a coefficient of expansion of almost zero, yet they are very light and especially in demand for applications requiring a long stylus.

Holders:

Our holders are made of stainless steel and are available with M2, M3, M4 or M5 threads.

Accessories:

We offer stainless steel, carbon fibre/ceramic or titanium extensions as accessories. We also have a wide range of joints, holders and adapters. For more information on our accessories, take a look in our stylus brochure.

If you have special requirements not covered by our extensive range of styli, we can work with you to find an optimum solution tailored to your products and processes.

You can find specific information in our program overview:

 

 Diamond Coated Styli

 

NEW: Diamond Coated Styli 

DC styli with diamond coated ball are the perfect alternative to existing ball materials. They can be used to measure extremely hard,very rough, abrasive and sharp surfaces tactilely by scanning. Compared to ruby or silicon nitride, our nanocrystalline DC balls achieve the highest lifetime and thus the lowest wear.

Download further information

 
 

 M2 styli

 
 

If you have any questions about our products, we look forward to hearing from you and personally advising you. Call us on +49 (0) 7121 90 97 10 – our lines are open Monday to Thursday from 08.00 to 16.00 or Friday from 08.00 to 13.00.

Contact us

 

 M3 styli

 
 

If you have any questions about our products, we look forward to hearing from you and personally advising you. Call us on +49 (0) 7121 90 97 10 – our lines are open Monday to Thursday from 08.00 to 16.00 or Friday from 08.00 to 13.00.

Contact us

 

 M4 styli

 

Adapters and collision break-off element

Download further information

Extension pieces

Download further information

 

If you have any questions about our products, we look forward to hearing from you and personally advising you. Call us on +49 (0) 7121 90 97 10 – our lines are open Monday to Thursday from 08.00 to 16.00 or Friday from 08.00 to 13.00.

Contact us

 

 M5 styli

 

Styli without thread

Download further information

Star styli and disc styli

Download further information

Joints and adapters

Download further information

Cubes for star styli

Download further information

Extension pieces

Download further information

 

If you have any questions about our products, we look forward to hearing from you and personally advising you. Call us on +49 (0) 7121 90 97 10 – our lines are open Monday to Thursday from 08.00 to 16.00 or Friday from 08.00 to 13.00.

Contact us

 

 Request special styli

 

Request cylindrical and disc styli

Download form for custom-made styli

 

Applications for our measuring sensors

Measuring styli from dk can be used for a wide variety of measuring and monitoring tasks. This includes, among other things, the measurement of distances, single points, depth and width as well as outer and inner diameters. In addition, styli can be used to measure the circular runout, the perpendicularity, to maintain the manufacturing tolerance and to check for machining errors on the workpiece.

Advantages of measuring probes

Our probes are not only suitable for efficient measurements in harsh conditions, but also offer you many other advantages compared to other measuring probes:

– Rapid measuring and probing speed

– Accurate measurements

– Minimising deviations

– Flexible technology for complex measurement processes

– Robust quality and long service life

– Perfectly coordinated series of accessories

Direct advice from the probe manufacturer

Tactile or optical probes? Are you not sure which measuring component is best suited to your application? You can contact us at any time and we will be happy to answer your questions about probes and styli. We will be happy to advise you personally under +49 (0) 7121 90 97 10 or send us an email to: info@dk-fixiersysteme.de

Do you require further information on dk styli?

 

Reception

+49 (0) 7121 90 97 10
info@dk-fixiersysteme.de

Would you like a callback? We are more than happy personally advise you about our products. Please leave your name, telephone number and a short message describing your enquiry.





dk offers even more measuring technology solutions!

You can find all our other products as well as product information in our catalogue.

Download full catalogue

 

dk FIXIERSYSTEME is a specialist provider of modular clamping systems for measuring technology. The focus is on the professional fixturing of workpieces to inspection tables. Learn more.

dk FIXIERSYSTEME is a specialist provider of modular clamping systems for measuring technology. The focus is on the professional fixturing of workpieces to inspection tables. Learn more.

CAD DatenKontaktXingFacebookNewsletterYoutubeInstagram